WENZHOU ZHEHENG STEEL INDUSTRY CO;LTD
Provide reliable and complete pipeline accessories and solutions for the world.
Add to Cart
F59 S32520 1.4507 duplex stainless steel pipe tee equal or reducing pipe fittings
EURONORM 1. 4507 - X2 Cr Ni Mo Cu N 25.6.3, AFNOR Z3 CNDU 25.07 AZ, UNS S32550, UNS S32520
"Zheheng steel" specializes in producing duplex stainless steel equal tee, reducing tee, reducing pipe (eccentric, concentric), flanging, pipe cap, flange.This product strictly follows ASTM ASME B16.9 DIN, JIS and other standards.The materials used are F59 ,S32520 ,1.4507 and other stainless steel materials.
1. Standard:
UNS-S32520
2. Type:
Duplex Stainless Steel
3. Surface:
NO.1-S32520 NO.1; BA-S32520 BA; 2B-S32520 2B,etc
4. Processing Way:
Hot Rolled, Cold Rolled
5. Treatment:
Pickled, Quenched, Tempered, Annealed
6. Chemical Composition:
%C: max. 0,03%Cr: 24,0-26,0%Cu: 1,00-2,50%Mn: max. 2,00%Mo: 3,00-4,00%Ni: 6,00-8,00%P: max. 0,035%S: max. 0,015%Si: max. 0,70%Balance: N 0,20-0,30%
8. Application Area:
When UNS S32520 is used in Plates/Sheets/Coils,They will be taken into use for oil refining, fertilizer, papermaking, petroleum and
other fields with high request of resistant for sea, high temperature like exchanger, condenser’s equipments,etc.
Product range:
| size | 1/2"-6" sch10s -schxxs |
| Material | Duplex Stainless Steel: |
| F59 S32520 1.4507 | |
| STANDARD | ASTM / JIS / DIN / BS / GB/GOST |
| TYPE | equal tee, reducing tee or according to drawing |
| APPLICATION | Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
| ODM&OEM | We can also produce according to material proviede or appointed by customer |
Dimensions of Straight Tees and Crosses
| Nominal Pipe Size (NPS) | Outside Diameter at Bevel | Center-to-End | |
| Run, C | Outlet, | ||
| M | |||
| [Notes ⑴ and ⑵] | |||
| 1/2” | 21.3 | 25 | 25 |
| 3/4” | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1-1/4” | 42.2 | 48 | 48 |
| 1-1/2” | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2-1/2” | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3-1/2” | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
GENERAL NOTE: All dimensions are in millimeters.
NOTES:
(1)Outlet dimension M for NPS 26 and larger is recommended but not required.
(2)Dimensions applicable to crosses NPS 24 and smaller.
Material notes:
Description: URANUS® 52N+ (UR 52N+) is a super duplex stainless steel with 25% Cr and a PREN value higher than 40. The minimum guaranteed yield strength is 550 MPa which allows the designer to reduce weight. The molybdenum and nitrogen additions have been optimized in order to obtain the best corrosion resistance properties even for heavy plates. High nitrogen content improves the structure stability particularly in HAZ. Its corrosion resistance is much better than UR B6/N08904 and roughly equivalent to 6 Mo super austenitic alloys. Copper additions increase the corrosion resistance properties, particularly in sulfuric acid media. URANUS® 52N+ is a cost efficient grade designed for offshore, marine, phosphoric acid, sulfuric acid applications... as well as pollution control equipments.
Products show: